Stainless Steel Tubing Size Chart: OD, ID, Wall
Stainless Steel Tubing Size Chart: OD, ID & Wall Thickness Reference
Use this chart to look up standard precision stainless steel tubing dimensions by outside diameter. For hypodermic and small-diameter gauge sizes, see the hypodermic tubing gauge chart. All dimensions are nominal, confirm tolerances with RoundWorks for your specific application.
Most Common Stainless Steel Tubing Sizes
| OD (mm) | Wall (mm) | ID (mm) |
|---|---|---|
| Medical Hypodermic Gauges | ||
| 2.108 | 0.254 | 1.600 |
| 1.651 | 0.229 | 1.194 |
| 1.270 | 0.216 | 0.838 |
| 1.067 | 0.190 | 0.686 |
| 0.902 | 0.153 | 0.597 |
| 0.813 | 0.152 | 0.508 |
| 0.711 | 0.152 | 0.406 |
| 0.635 | 0.152 | 0.330 |
| 0.508 | 0.127 | 0.254 |
| 0.406 | 0.102 | 0.203 |
| Common Metric Round Sizes | ||
| 2.974 | 0.424 | 2.126 |
| 3.965 | 0.475 | 3.015 |
| 4.976 | 0.276 | 4.425 |
| 5.974 | 0.174 | 5.626 |
| 6.975 | 0.274 | 6.426 |
| 7.976 | 0.470 | 7.036 |
| 8.974 | 0.475 | 8.024 |
| 9.975 | 0.375 | 9.225 |
| 10.970 | 0.370 | 10.231 |
| 11.971 | 0.971 | 10.030 |
Looking for a specific size, custom OD/wall combination, or part number? See the full RoundWorks stock tubing list for our complete inventory with tolerances, or contact us for custom specs.
How to Read Stainless Steel Tubing Specifications
Outside diameter (OD) is always the primary specification. It defines the external profile of the tube and determines fit with external components, fittings, and assemblies. OD is the dimension you select first.
Wall thickness determines the tube’s structural capacity and its inside diameter. For a given OD, a thicker wall means a smaller ID and a stronger tube, while a thinner wall maximizes internal flow area. ID is calculated as OD minus twice the wall thickness.
Tolerances vary by specification standard and tube size. Standard drawn tubing per ASTM A269 holds OD tolerances within a few thousandths of an inch. For tighter requirements, centerless grinding achieves ±0.0002″.
Frequently Asked Questions
What sizes does RoundWorks stock?
RoundWorks stocks precision 304 stainless steel tubing from small hypodermic gauges through 1″ OD and larger, in multiple wall thickness options. Stock sizes ship within 24 hours. Custom sizes are available on request.
What is the most common OD for precision stainless tubing?
1/4″ (0.250″) and 1/2″ (0.500″) OD are among the most commonly ordered sizes for general-purpose precision tubing. For medical applications, hypodermic gauge sizes (18 to 25 gauge) are most common.
What wall thickness should I specify for thin-wall tubing?
Thin wall is relative to OD. For hypodermic tubing, walls in the 0.004″ to 0.010″ range are common. For fractional sizes (1/4″ to 1″ OD), thin wall typically means 0.020″ to 0.028″. The right wall thickness depends on your application’s structural and flow requirements.